Infectivity and efficacy of Glomus aggregatum and growth response of Cajanus cajan (L.) Millsp. in flyash amended sterile soil

In the present investigation a pot culture experiment was conducted using sterile, phosphorus deficient soil to study the effect of flyash at 3 different concentrations (10g, 20g and 30g flyash/kg soil) on the infectivity and effectiveness of VAM fungus Glomus aggregatum in pigeonpea (Cajanus cajan (L.) Millsp.) cv Maruti. The flyash amendment in soil at all the 3 different concentrations was found to affect significantly the intensity of VAM fungal colonization inside the plant roots and also suppressed the formation of VAM fungal structure (vesicles and arbuscules) completely at higher concentration (30g flyash/kg soil). The response of the pigeonpea plants, as judged by their higher and dry weight, under the influence of flyash amendment in VAM fungus infested soils was found to be considerably less (though not significant enough) when compared to the control plants (without flyash) that have otherwise shown significant increase in growth over the plants without Glomus aggregatum inoculation. However, flyash amendment without VAM inoculation was also found to enhance the growth of plants as compared to control plants (without flyash and VAM inoculum).     

Propylene glycol vapor contamination in controlled environment growth chambers: toxicity to corn and soybean plants

A major, often unrecognized variable regulating plant growth in semi-closed environment is air contaminant. The vapor of propylene glycol (PG), which was used as coolant in growth chambers, has been found to be toxic to corn (Zea mays L.) and soybean (Glycine max L.) plants. PG solution leaked from a valve packing system and volatilized to vapor, which was trapped in a semi-closed growth chamber. Symptoms of leaf edge chlorosis, later developing into necrosis, were observed on the third day of emergence or on the third day after moving healthy plants into the chamber. For young soybean plants, symptoms were slightly different from those observed in corn plants; the chlorosis symptoms were not uniformly distributed on all leaves. Some soybean leaves curled up and others had white spots. This problem was identified by using a portable photoionization detector to obtain instantaneous readings of total volatile organic compound concentrations inside the chambers. The presence of PG in selected chambers was verified using sample collection with solid phase microextraction (SPME) followed by analysis with multi-dimensional gas chromatography mass spectrometry (MD-GC-MS). This information is pertinent to researchers who use controlled environment to grow plants.     

Radiocarbon content of synthetic and natural semi-volatile halogenated organic compounds

Some halogenated organic compounds, such as polychlorinated biphenyls (PCBs), polychlorinated dibenzo-p-dioxins (PCDDs) and polybrominated diphenyl ethers (PBDEs), have been suggested to have natural sources but separating these compounds from their commercially synthesized counterparts is difficult. Molecular-level 14C analysis may be beneficial since most synthetic compounds are manufactured from petrochemicals (14C-free) and natural compounds should have "modern" or "contemporary" 14C levels. As a baseline study, we measured, for the first time, the 14C abundance in commercial PCB and PBDE mixtures, a number of organochlorine pesticides, as well as one natural product 2-(3',5'-dibromo-2'-methoxyphenoxy)-3,5-dibromoanisole. The latter compound was isolated from a marine sponge and is similar in structure to a PBDE. All of the synthetic compounds were 14C-free except for the pesticide toxaphene. which had a modern 14C abundance, as did the brominated natural compound. The result for toxaphene was not surprising since it was commercially synthesized by the chlorination of camphene derived from pine trees. These results suggest that measuring the 14C content of halogenated organic compounds may be quite useful in establishing whether organic compounds encountered in the environment have natural or synthetic origins (or both) provided that any synthetic counterparts derive from petrochemical feedstock.     

Effect of field exposure to 38-year-old residual petroleum hydrocarbons on growth, condition index, and filtration rate of the ribbed mussel, Geukensia demissa

In September 1969, the Florida barge spilled 700,000 L of No. 2 fuel oil into the salt marsh sediments of Wild Harbor, MA. Today a substantial amount, approximately 100 kg, of moderately degraded petroleum remains within the sediment and along eroding creek banks. The ribbed mussels, Geukensia demissa, which inhabit the salt marsh creek bank, are exposed to the spilled oil. Examination of short-term exposure was done with transplantation of G. demissa from a control site, Great Sippewissett marsh, into Wild Harbor. We also examined the effects of long-term exposure with transplantation of mussels from Wild Harbor into Great Sippewissett. Both the short- and long-term exposure transplants exhibited slower growth rates, shorter mean shell lengths, lower condition indices, and decreased filtration rates. The results add new knowledge about long-term consequences of spilled oil, a dimension that should be included when assessing oil-impacted areas and developing management plans designed to restore, rehabilitate, or replace impacted areas.     

Impact of soil quality on elemental uptake by, and distribution in, Colocasia esculenta (Amadumbe), an edible root

In this study the elemental distribution of selected essential (Ca, Mg, Al, Mn, Cu, Fe, Co, Cr, Zn, Ni and Se) and the non-essential (Pb, Hg and As) elements were determined in the bulb and peel of Amadumbe (Colocasia esculenta) samples from eight different sites in KwaZulu-Natal, South Africa. The concentration of Se and As in the soil and in the Amadumbe bulbs were below the detection limit of 0.09 μg g?1. The total and bioavailable concentrations of the elements in conjunction with pH, soil organic matter (SOM) and cation exchange capacity (CEC) were determined in the soil samples from the eight sites. Statistical analysis was done to evaluate the impact of soil quality parameters on the chemical composition of the Amadumbe root. The results show accumulation or exclusion of certain elements by the bulb as evidenced by the noticeable increase or decrease of the concentrations of elements, respectively. Ca and Mg were found to be major elements in the range (2000-12000 μg g?1), whilst Mn, Zn, Fe and Al were found to be minor elements in the range (20-400 μg g?1). A general trend observed was that the plant favours the absorption of Zn over Cu. A positive correlation between Mg & Ca, Cu & Fe and Co & Ni was also observed. Statistical analysis revealed that the plant tended to accumulate Mg, Ca, Co, Cr and Pb whilst it excluded Hg and Fe, to a lesser extent.     

Identification of highly brominated analogues of Q1 in marine mammals

Three novel halogenated organic compounds (HOCs) have been identified in the blubber of marine mammals from coastal New England with the molecular formulae C(9)H(3)N(2)Br(6)Cl, C(9)H(3)N(2)Br(7), and C(9)H(4)N(2)Br(5)Cl. They were identified using high and low resolution gas chromatography mass spectrometry (GCMS) and appear to be highly brominated analogues of Q1, a heptachlorinated HOC suspected to be naturally produced. These compounds were found in Atlantic white sided dolphin (Lagenorhynchus acutus), bottlenose dolphin (Tursiops truncatus), common dolphin (Delphinus delphis), Risso's dolphin (Grampus griseus), harbor porpoise (Phocoena phocoena), beluga whale (Delphinapterus leucas), fin whale (Balaenoptera physalus), grey seal (Halichoerus grypus), harp seal (Phoca groenlandica) and a potential food source (Loligo pealei) with concentrations as high as 2.7 microg/g (lipid weight). The regiospecificity of C(9)H(3)N(2)Br(6)Cl is suggestive of a biogenic origin. Debromination of C(9)H(3)N(2)Br(6)Cl may be significant in the formation of C(9)H(4)N(2)Br(5)Cl.     

Effect of pH control at the anode for the electrokinetic removal of phenanthrene from kaolin soil

Polycyclic aromatic hydrocarbon (PAH)-contaminated soils exist at numerous sites, and these sites may threaten public health and the environment because many PAH compounds are toxic, mutagenic, and/or carcinogenic. PAHs are also hydrophobic and persistent, so conventional remediation methods are often costly or inefficient, especially when the contaminants are present in low permeability and/or organic soils. An innovative technique, electrokinetically enhanced in situ flushing, has the potential to increase soil-solution-contaminant interaction and PAH removal efficiency for low permeability soils; however, the electrolysis reaction at the anode may adversely affect the remediation of low acid buffering capacity soils, such as kaolin. Therefore, the objective of this study was to improve the remediation of low acid buffering soils by controlling the pH at the anode to counteract the electrolysis reaction. Six bench-scale electrokinetic experiments were conducted, where each test employed one of three different flushing solutions, deionized water, a surfactant, or a cosolvent. For each of these solutions, tests were performed with and without a 0.01 M NaOH solution at the anode to control the pH. The test using deionized water with pH control generated a higher electroosmotic flow than the equivalent test performed without pH control, but the electroosmotic flow difference between the surfactant and cosolvent tests with and without pH control was minor compared to that observed with the deionized water tests. Controlling the pH was beneficial for increasing contaminant solubilization and migration from the soil region adjacent to the anode, but the high contaminant concentrations that resulted in the middle or cathode soil regions indicates that subsequent changes in the soil and/or solution chemistry caused contaminant deposition and low overall contaminant removal efficiency.     

Assessment of bioavailable nitrogen and phosphorus content in the sediments of Indian mangroves

Environmental Science and Pollution Research - Efficient nutrient cycling and adequate sediment bioavailable nutrient supply are considered to be the two most important factors regulating the high...     

Combustion performance and emission characteristics on HCCI engine of waste plastic pyrolysis oil biodiesel blends with external PFI and vaporiser

ABSTRACT

Analysis of plastic oil obtained from waste plastic through pyrolysis process, as an alternative to biodiesel is presented in this paper. The HCCI engine is considered for experimental validation of combustion performance and emission characteristics. To accumulate pyrolysis oil as fuel, the design modifications were made in external mixture formation on the existing computerised 4-stroke, single cylinder, water cooled, direct injection kirloskar diesel engine connected with eddy current dynamometer to satisfy HCCI conditions. HCCI engine can be worked on wide assortment of fuels beginning from diesel to different blends (WPPO 5%,10%,15% and 20% by volume) of biodiesel .The designed additional device connected to the engine is utilised for fuel vaporisation and mixture arrangement. In the experimental study, the combustion results were initiate to be of 39.69 % higher Rate of Heat Release (RoHR) for biodiesel HCCI as compared with diesel HCCI. Higher brake thermal efficiency (BTE) was found 37 % without exhaust gas recirculation (EGR) at WPPO 20 % biodiesel blend. And also found 50 % and 65 % reduction in NOx emission and 18 % and 28 % reduction in smoke opacity are obtained for biodiesel vapour induction without EGR and biodiesel vapour induction with 15 % EGR as compared with diesel fuel. The CO (0.34 %), and UHC (2.15 %) emissions are increases with 15 % EGR, but the emissions are within the standard limits specified by the emissions standards.     

Analytical prediction of stepped feature generation in multi-pass single point incremental forming

Single point incremental forming (SPIF) is a new sheet metal forming process characterized by higher formability, product independent tooling and greater process flexibility. The inability of conventional single pass SPIF to form vertical walls without failure is overcome by forming multiple intermediate shapes before forming the final component, i.e., multi-pass single point incremental forming (MSPIF). A major issue with MSPIF is significant geometric inaccuracy of the formed component, due to the generation of stepped features on the base. This work proposes analytical formulations that are shown to accurately and quantitatively predict the stepped feature formation in MSPIF. Additionally, a relationship is derived among the material constants used in these analytical equations, the yield stress and thickness of the blank material, such that the computational effort required for the calibration of these constants can be minimized. Finally, the physical effects of yield stress and sheet thickness on the rigid body translation are further discussed.